Essentials of a Tubular Lock Pick: How To Use It?

Tubular locks are commonly found on various types of equipment, such as vending machines, computer locks, and small gun safes. They are high-security and designed to make it harder to break into a home. The key is made of a tube-shaped material and has cuts on both the outside and inside.

Tubular locks are different from traditional locks in that they do not have a traditional look. You can usually ask a professional to open them for you. However, sometimes, you might need to do it yourself using a tubular lock pick. This is why we came up with a way to make it happen. If you are interested in learning more about tubular locks, read on!

What Exactly is a Tubular Lock?

The radial or tubular lock is a standard type of lock commonly used in washing machines and coin-operated vending machines. These are packed with high-security toggle switches.

A key is required to open a hasp with lock when arranged in a circle. The outer portion of the key is located at its farthest end, and the notches' depth and breadth correspond with the pins' locations. On the other hand, the tubular key contains two notches on either side of the inner portion.

The notches on the lock's surface align the key to the lock's surface. If the key is not aligned, it can go into any position. The pins are pushed back by biting the key and turning the plug freely.

You can use the tubular lock pick or drill it if you have lost your tubular key. Since there is no traditional way to access a key, picking can be a bit challenging. On the other hand, regular tubular locks can be drilled out using a pilot hole saw.

Those who want to keep the original lock but are not sure how to use a tubular lock pick may purchase a special hasp with lock kit. However, this method will take a lot of patience and practice.

2 Steps For Tubular Lock Picking

There are many strange and legend-filled facts about lock picking. However, this skill is very important for anyone interested in becoming a skilled locksmith.

The tubular lock is the most standard type of lock that is difficult to open without a key. However, it is possible to pick this type of lock if you have the right tools and practice it. You can use a ballpoint pen or the tubular lock pick to open it. Or you can use a pipe pick if that does not work.

You can enhance your technique by using a practice lock made of transparent material. This type of lock will allow you to see what you are doing while you are holding it. If you are not interested in learning how to pick certain items, you can skip the step and use a different type of lock.

Before picking a hasp with lock, it is important to clean it thoroughly. You can accomplish this by rinsing it with warm water and soap, and it can also be done by removing as much rust as possible.

Use a Lock Pick Tool

Make sure the lock pick you use has the correct number of needles. For instance, if your lock has seven pins, you should use a combination of lock picks with seven needles. To loosen it, turn the lock pick's tighten bolt on its side. We recommend using the tubular lock pick.

When the bolt is loose, position the tubular lock pick against the lock to align the inner needles with the pins. After loosening the bolt, tighten it again to ensure that the pins and needles are aligned. When the lock pick is inserted into the lock, it should stay in the lock as far as it can go. If the pick gets stuck in the lock, remove it and turn the bolt.

Use a Ball Point Pen

To remove the end of a ballpoint pen, use a pair of scissors to cut it off. You can then remove the ink tube to open the lock. For instance, if you're using a recyclable pen, you can remove the cap and the ink tube from the inside, while the cap will be removed from the end. Make sure the pen has a smaller diameter than the opening of the hasp with lock.

Final Words

A tubular lock is a high-security hasp with lock designed to make it incredibly difficult to pick. They're typically made with a modified pin configuration, which makes them very different from other types of locks.

You can use the tubular lock pick or if you're unsure how to open this type of lock, contact a professional who is always ready to help you with any issue or question.